Call us on: 
Low Profile 15 screed system
The Low Profile 15 panel has been designed for optimum system performance and to ensure accurate installation and pipe positioning.
The panels are manufactured from 100% recycled polystyrene, panels can be cut to size quickly and easily, thus allowing for a quick and easy installation in any size or shaped room.
The panel’s interlock for easy storage and carrying and form a precise grid for the pipe; ensuring minimum pipe bend radius is achieved. In addition, with the panels being self-adhesive backed this allows for easy fixing to the sub-floor whilst the castellations provide protection for the pipe from onsite foot traffic as well.
The low profile 15 screed system allows for a lower finished floor height to be achieved because it can be utilised with screed depths from 35mm, whereas the recommended level of screed for red floor panels is 65mm. Remember to always check your screed manufacturer’s installation advice.
If you are unsure which Polypipe Underfloor Heating system is the best fit for your project, our team of in-house specialists would be happy to discuss your project and make a recommendation. Simply give us a call on 01709 772380.
Download data Sheet
Features & benefits of using the Low Profile 15 system
- Simpler, more accurate installation
- Suitable to be used in both retrofit & new build applications
- Can be used with traditional & liquid screeds as well as with levelling compound for retrofit projects
- Sticky backing with a peel off plastic sheet adds to the ease of installation
- Precise pipe positioning
- Suitable for foot traffic during installation due to high surface strength
- Quick and easy to install as sheets overlap
- Can easily be cut to fit any room size
- Allows spiral Configurations from 100mm – 200mm pipe centres
- Approximately 15% less screed required than other “In the Floor Products”
- 50mm pipe spacings allows for ease of distributing connection lengths out at the manifold
Key design information
| Typical heat output at 50ºC mean water temperature | 91 W/m2 at 100 mm pipe spacing |
| Recommended design flow temperatures | 35-50ºC |
| Maximum circuit length | 120m |
| Maximum coverage per circuit | 13.5m2 at 100 mm centres 17.5m2 at 150 mm centres 25m2 at 200 mm centres |
ARDEX products are the perfect compliment to the Staple Underfloor Heating System
Download our NEW Polypipe Underfloor Heating and ARDEX technical installation guide to find out more.
Get a FREE underfloor heating quote today
Simply send us your plans and we’ll send you a quote back within 3 hours*
* For single home projects where all required information is supplied, turnaround times for quotes will be three hours, within our normal working hours of Monday to Friday, 9am-5pm. A member of our Underfloor Heating team will contact you promptly to discuss the details of your project and confirm your expected quotation time.
Call us on: 01709 772380
