Polypipe underfloor heating room packs are an affordable all-in-one solution, providing everything you need to heat your chosen room size.
Red Floor Panel (In the floor)
The Red Floor Panel system is best practice for installing underfloor heating into solid or screeded floors. Our unique lightweight plastic floor panels facilitate optimum system performance by holding the pipe in the spiral configuration. With the pipe held at regular intervals and up off the insulation, it can be completely enveloped by the screed, leading to better heat output than systems which fix the pipe directly to the insulation. The panels are also quick and easy to cut to size, meaning they can be fitted easily into any shaped room.
Red Floor Panel (In the floor)
- 1. Insulation
- 2. Pipe
- 3. Red Floor Panel
- 4. Edge expansion
- 5. Screed
- 6. Finished floor
Ideal floor coverings
Tiles & ceramics, vinyl, wood laminate, engineered wood, solid wood & carpet
Home owner benefits
- Ideal for ground floors, new build or extensions
- Little if any change to floor construction
- Can be used with low temperature heat sources
- Use with all common floor coverings
- Can reduce the amount of screed content needed
Installer benefits
- Simpler, more accurate installation
- Precise pipe positioning
- Ensures minimum pipe bending radius achieved
- Quick and easy to use
- Can use in any size room
- Allows spiral configurations and 100mm pipe centres
If you decide not to include an optional thermostat in your room pack, your new underfloor heating will be set by your main zone thermostat.
Wired Thermostat
This thermostat is wired directly to your boiler or heat source, allowing you to set an independent temperature for your new underfloor heating from the rest of your home heating. This thermostat also allows for programmes to be set to tailor your heating to your home and habits.
RF Thermostat
For a simpler method of controlling your underfloor heating, this dial thermostat allows you to easily adjust the temperature up and down as required. It is installed in the same room as the underfloor heating and sends temperature information to the remote RF receiver that is wired directly into your boiler or heat source.
In addition to the method of pipe fixing you have selected, your pack will contain the following items.
Zonal Regulation Unit
The Polypipe Zonal Regulation Unit allows you to install underfloor heating within a single room quickly and efficiently without the need for a separate manifold. It can effectively control an installation of up to 30m2 to be regulated either by an existing or independent thermostat.
Advanced Barrier Pipe
Designed specifically for easy installation and a maximum energy output, all Polypipe Underfloor Heating products are designed around our outstanding ultraflexible barrier pipe to create an unrivalled range.
Red Floor Panel room pack contents comparison table
| Room size | 12m2 | 20m2 | 30m2 |
|---|---|---|---|
| ZRU (Zonal Regulation Unit) |  | | |
| Red Floor Panel 1200 x 100mm | 12 | 20 | 30 |
| Underfloor Heating Pipe Coil 15mm x 100mtr | 1 | 2 | 3 |
| Edge Expansion Roll | 1 | 1 | 2 |
| 15mm PolyPlumb Equal Tee | 2 | 4 | |
| 15mm PolyPlumb Spigot Elbow | 2 | 4 | |
| Pipe Stiffeners | 30 | 30 | 30 |
Why our Underfloor Heating Room Packs may be the solution for you
Get a FREE underfloor heating quote today
Simply send us your plans and we’ll send you a quote back within 3 hours*
* For single home projects where all required information is supplied, our usual turnaround times for quotes will be within three hours, within our normal working hours of Monday to Friday, 9am-5pm. A member of our Underfloor Heating team will contact you promptly to discuss the details of your project and confirm your expected quotation time.
 Call us on: 01709 772380
