The Polypipe Floating Floor System is designed for use in applications where a solid floor installation is not suitable due to structural weight limitations or where a ‘dry build’ floor option is required. Suitable for use in either new build or existing properties, the floating floor panels can be installed directly on top of both solid and timber floors.
The 50 mm thick high density polystyrene panels have a thermal value of 0.036 W/mK and can be used to enhance the thermal insulation requirement of the floor structure as necessary under current Building Regulations.
However, care should be taken when installing floating floor panels on top of a primary insulation layer to ensure that excessive deflection does not occur in final floor construction. It is therefore recommended that any other insulation materials used below the floating floor panels are of a high density construction (100kN/m2 at 10% compression min).
Features & Benefits of using the Floating Floor system
|Key Design Information|
|Typical heat output at 50℃ mean water temperature||Approx. 65 W/m2 at 200 mm pipe spacing|
|Recommended design flow temperatures||45-50℃|
|Maximum circuit length||100 m (15 mm pipe)|
|Maximum coverage per circuit||20 2|
Panel: 1200 mm x 800 mm x 50 mm
End return: 800 mm x 300 mm x 50 mm
Over the Floor
Still have doubts? We have answered some of the most common myths Read the facts
Become a Polypipe Registered Heating Engineer and find out how you could benefit from our products and services.Engineer Section
Cost-effective heating solutions and FAQs. Discover how you could enhance the desirability of your project with underfloor heating.Developer Section
Learn how our underfloor heating systems and innovative Smart Controls can deliver more design freedom.Architect Section
Are you a stockist looking to contact your Heating Manager? View Key Contacts